Programming A Pattern Combination; Mirror Image Of Patterns; Bridge Stitches - ELNA eXcellence 792PRO Instruction Book

(7)
(2)
(3)
(4)
(1) (8)
(5) (6)
PROGRAMMING A PATTERN
COMBINATION
The patterns in the decorative stitch category and
monograms can be programmed to make a pattern
combination.
You can program up to 100 patterns in each combination
by pressing the program key.
The images of programmed patterns are shown on the
left side of the visual touch screen.
(1) Program key

Mirror Image of Patterns

To sew or program the pattern as a mirror image, press
the vertical mirror key or horizontal mirror key.
Mirror image icon appears on the screen and mirror
image function is enabled.
Select the desired patterns to create the mirror image.
Press the vertical or horizontal mirror key again to cancel
the mirror image function.
(2) Vertical mirror key
(3) Horizontal mirror key
(4) Vertical mirror icon
(5) Horizontal mirror icon
(6) Vertical and horizontal mirror icon
NOTE:
• Horizontal mirror image is available only for specific
patterns. For pattern identification, these patterns
are shaded in light gray on the stitch chart (Refer to
pages 151-155).
• The vertical or horizontal mirror image key will gray
out when the selected pattern is not suitable for the
mirror image.
To view the entire pattern combination, press the cursor
key to scroll over the pattern combination or press the
preview key to show the entire pattern combination at a
glance.
(7) Cursor keys
(8) Preview key
NOTE:
Presser foot pressure cannot be adjusted to the stitch
patterns of a pattern combination individually.
If you attempt to do so, only the last pattern's
presser foot pressure settings are applied to all the
programmed patterns.

Bridge Stitches

D6
Bridge stitches are used for inserting straight stitches
BR5
after a stitch pattern.
The number beside the stitch image on the straight stitch
key indicates the stitch count of a programmable unit.
If you want more space between French knots (D6), for
example, insert pattern BR5 after pattern D6.
Two counts of straight stitches are added to pattern D6.
NOTE:
Patterns BR5, BR6 and BR8 will inherit the stitch
length and needle drop position of the previous
pattern in the pattern combination.
87