Inserting The Bobbin - ELNA 6003 Instruction Book

inserting the Bobbin
@ Place the bobbin in the bobbin case with the thread running counter-
clockwise
® Guide the thread into notch A on the front side of the bobbin case.
Hold the bobbin with your right hand and pull the thread to the left,
through the tension spring blades.
Continue pulling the thread lightly until the thread slips into notch B.
Pull out about 15 cm (6") of thread.
@ Replace the bobbin cover plate.
Check the threading by referring to the chart shown on the bobbin
cover plate.
13