Changes To The B30 Manual - GE B30 Instruction Manual

F.1 CHANGE NOTES
Table F–1: REVISION HISTORY
MANUAL P/N
1601-0109-X2
1601-0109-Y1
1601-0109-Y2
1601-0109-Y3
Table F–2: MAJOR UPDATES FOR B30 MANUAL REVISION Y3
PAGE PAGE CHANGE
(Y2) (Y3)
-- xi Add
1-1 1-1 Add
2 2 Update
2-10 2-10 Update
5-119 5-119 Update
5-180 5-180 Add
Table F–3: MAJOR UPDATES FOR B30 MANUAL REVISION Y2
PAGE PAGE CHANGE
(Y1) (Y2)
All All Update
All All Delete
F
1-1 1-1 Update
3-8 3-8 Update
Table F–4: MAJOR UPDATES FOR B30 MANUAL REVISION Y1 (Sheet 1 of 2)
PAGE PAGE CHANGE
(X2) (Y1)
All All Delete
Title Title Update
1-1 1-1 Update
1-4 1-4 Delete
2-4 2-4 Add
2-4 2-4 Delete
2-15 2-15 Update
3-10 3-10 Update
3-23 3-23 Update
5-1 5-1 Update
5-14 5-14 Delete
5-14 5-14 Update
5-15 5-15 Add
F-2
B30 REVISION RELEASE DATE
6.0x 5 April 2012
7.0x 30 September 2012
7.0x 11 November 2012
7.0x 30 April 2013
DESCRIPTION
Added battery disposal information as chapter 0
Added General Cautions and Warnings to section 1.1.1
Updated several specifications
Updated Bus Differential Pickup Level specification from 2.000 to 6.000 pu
Updated Bus Differential Pickup Level specification from 2.000 to 6.000 pu in section 5.6.3 Bus
Differential
Reinserted section 5.8.5c Remote Devices: ID of Device for Receiving GSSE/GOOSE Messages,
meaning the Settings > Input/Outputs > Remote Devices settings
DESCRIPTION
Minor changes throughout document
Deleted CPU options U and V
Updated Figure 1-1 Rear Nameplate
Updated Figure 3-10 Rear Terminal View
DESCRIPTION
Deleted content pertaining to Ethernet switch
Changed part numbers. Updated address and contact information.
Updated address and contact information
Deleted section 1.2.4 Important UR Concepts
Added CPU options T, U, and V to order code table
Deleted E, G, H, J, S from CPU options from order code tables. Deleted 9S, 2S, 2T from
replacement module order code tables and revised replacement modules to be T, U, V
Updated Ethernet fiber table in section 2.2.8 Communications
Updated Figure 3-12 Typical Wiring Diagram
Deleted references to COM 1 RS485 port in section 3.2.9 CPU Communication Ports. Revised
text and Figure 3-24 CPU Module Communications Wiring to include only modules T, U, V in
section 3.2.9a.
Updated the front panel main menu to include the CyberSentry security menu
Deleted references to COM 1 RS485 port in section 5.2.4b Serial Ports
Update Communications main menu to remove the SNTP Protocol submenu
Added section 5.2.4c Ethernet Network Topology
B30 Bus Differential System
ECO
12-3254
12-3529
12-3601
13-0167
F.1.2 CHANGES TO THE B30 MANUAL
APPENDIX F
GE Multilin