GE B30 Instruction Manual page 123

4 HUMAN INTERFACES
password has been entered via the any external communications interface three times within a 3-minute time span, the
FlexLogic operand is set to
REMOTE ACCESS DENIED
any external communications interface for the next five minutes.
In the event that an incorrect Command or Setting password has been entered via the any external communications inter-
face three times within a three-minute time span, the
B30 does not allow Settings or Command access via the any external communications interface for the next ten minutes.
The
REMOTE ACCESS DENIED
GE Multilin
On and the B30 does not allow settings or command access via the
" "
REMOTE ACCESS DENIED
FlexLogic operand is set to "Off" after the expiration of the ten-minute timeout.
B30 Bus Differential System
4.3 FACEPLATE INTERFACE
FlexLogic operand is set to "On" and the
4
4-29