GE B30 Instruction Manual page 119

4 HUMAN INTERFACES
b) HIERARCHY
The setting and actual value messages are arranged hierarchically. The header display pages are indicated by double
scroll bar characters (), while sub-header pages are indicated by single scroll bar characters (). The header display
pages represent the highest level of the hierarchy and the sub-header display pages fall below this level. The MESSAGE
UP and DOWN keys move within a group of headers, sub-headers, setting values, or actual values. Continually pressing
the MESSAGE RIGHT key from a header display displays specific information for the header category. Conversely, contin-
ually pressing the MESSAGE LEFT key from a setting value or actual value display returns to the header display.
HIGHEST LEVEL
 SETTINGS
 PRODUCT SETUP
 SETTINGS
 SYSTEM SETUP
c) EXAMPLE MENU NAVIGATION
 ACTUAL VALUES
 STATUS

 SETTINGS
 PRODUCT SETUP

 SETTINGS
 SYSTEM SETUP

 PASSWORD
 SECURITY

ACCESS LEVEL:
Restricted

 PASSWORD
 SECURITY

 DISPLAY
 PROPERTIES

FLASH MESSAGE
TIME: 1.0 s

DEFAULT MESSAGE
INTENSITY: 25%
GE Multilin
 PASSWORD
 SECURITY
Press the MENU key until the header for the first Actual Values page appears. This
page contains system and relay status information. Repeatedly press the MESSAGE
keys to display the other actual value headers.
Press the MENU key until the header for the first page of Settings appears. This page
contains settings to configure the relay.
Press the MESSAGE DOWN key to move to the next Settings page. This page con-
tains settings for System Setup. Repeatedly press the MESSAGE UP and DOWN
keys to display the other setting headers and then back to the first Settings page
header.
From the Settings page one header (Product Setup), press the MESSAGE RIGHT
key once to display the first sub-header (Password Security).
Press the MESSAGE RIGHT key once more and this will display the first setting for
Password Security. Pressing the MESSAGE DOWN key repeatedly will display the
remaining setting messages for this sub-header.
Press the MESSAGE LEFT key once to move back to the first sub-header message.
Pressing the MESSAGE DOWN key displays the second setting sub-header associ-
ated with the Product Setup header.
Press the MESSAGE RIGHT key once more to display the first setting for Display
Properties.
To view the remaining settings associated with the Display Properties subheader,
repeatedly press the MESSAGE DOWN key. The last message appears as shown.
B30 Bus Differential System
4.3 FACEPLATE INTERFACE
LOWEST LEVEL (SETTING
VALUE)
ACCESS LEVEL:
Restricted
4
4-25