Bus Zone; Sources - GE B30 Instruction Manual

6 ACTUAL VALUES

PATH: ACTUAL VALUES METERING
 BUS ZONE 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
These values display the differential and restraint currents phasors for the bus zone. The magnitudes are displayed in pri-
mary amperes (see chapter 8: Theory of operation for additional details).
a) MAIN MENU

PATH: ACTUAL VALUES METERING
 SOURCE SRC 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
This menu displays the metered values available for each source.
Metered values presented for each source depend on the phase and auxiliary VTs and phase and ground CTs assignments
for this particular source. For example, if no phase VT is assigned to this source, then any voltage, energy, and power val-
ues will be unavailable.
GE Multilin
 
BUS

BUS ZONE 1

BUS 1 DIFF Iad:
0.000 A 0.0°
BUS 1 REST Iar:
0.000 A 0.0°
BUS 1 DIFF Ibd:
0.000 A 0.0°
BUS 1 REST Ibr:
0.000 A 0.0°
BUS 1 DIFF Icd:
0.000 A 0.0°
BUS 1 REST Icr:
0.000 A 0.0°

SOURCE SRC1
 PHASE CURRENT
 SRC 1
 GROUND CURRENT
 SRC 1
 PHASE VOLTAGE
 SRC 1
 AUXILIARY VOLTAGE
 SRC 1
 FREQUENCY
 SRC 1
B30 Bus Differential System
6.3 METERING
See page 6–14.
See page 6–14.
See page 6–15.
See page 6–15.
See page 6–16.
6.3.2 BUS ZONE

6.3.3 SOURCES

6
6-13