Adjusting The Position Of The Gearchange And Rear Brake Pedals - Ducati Monster 1200 Owner's Manual

Adjusting the position of the gearchange
and rear brake pedals
Gear change pedal
The position of the gear shift and rear brake levers in
relation to the footrests can be adjusted to suit the
requirements of the rider.
To adjust the position of the gear shift lever, proceed
as follows: hold the linkage (1) and slacken the lock
nuts (2) and (3).
Note
Nut (2) features a left-hand threading.
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the desired
position. Tighten both check nuts onto linkage.
192
2
3
1
Fig 114