Engine Rpm Indication (Rpm) - Ducati Monster 1200 Owner's Manual

Engine rpm indication (RPM)

The instrument panel receives the engine rpm
information and displays it on the relevant bargraph
(in FULL and TRACK display modes only). The
information is displayed by the bargraph filling from
the left to the right according to the engine rpm and
with the enlargement of the numerical digit of the
relevant miles (if the RPM value is "8000" or higher,
number "8" is displayed bigger).
When reaching 12000 rpm no numerical digit is
"zoomed": number "12" is not displayed in a bigger
size and returns to the standard size of number "11").
The area for the 9500-10500 rpm range (pre-warning
area) is indicated on the display in orange, used both
for filling the bar graph and indicating the
corresponding figure 10 ("orange area").
The area for the 10500-11000 rpm range (warning
area) is indicated on the display in red, used both for
filling the bar graph and indicating the corresponding
figure 11 ("red area").
56
Important
During the first 600 mi (1000 km) (Break-in
period), i.e. as long as the Odometer displays a value
lower than or equal to 600 mi (1000 km), the "orange
area" (pre-warning area on the display with orange
used for bar graph filling and to indicate the
corresponding figure) is displayed when engine
reaches 6000 rpm. During this break-in period, it is
not advisable to exceed 6000 rpm, so make sure the
instrument panel does not display the "orange area"
of the bar graph.