Lap Time - Ducati Monster 1200 Owner's Manual

LAP time

The LAP function is available for the CORE and FULL
display modes on the LH menu, while for the TRACK
display mode it is in the central menu.
LAP function information is available when the
function is active.
When the LAP function is active, upon the first press
on FLASH button (3) menu displays LAP 01 message
and START flashing for 4 seconds and then the time
measured with a resolution of one tenth of a second
("0'00''0") for another 2 seconds. Upon any further
press of the FLASH button (3), the just ended lap
number and time are displayed with a resolution of
one hundredth of a second ("0'00''00") for 6 seconds
and then lap timer is displayed again together with
the number of new current lap (if LAP function is
selected from the menu).
If the LAP function is not selected from the menu, the
instrument panel will go back to the functions present
before the FLASH button (3) was pressed.
It is possible to scroll the other menu functions at any
time.
When storing the 30th LAP, the LAP function is
stopped and upon any further press on the FLASH
button (3), the instrument panel will display flashing
82
FULL message warning that the storage space for lap
times is full.
The function is displayed with TRACK layout. For
CORE and FULL display modes, the value for this
function is indicated in the menu at the bottom left-
hand side.