Table of Contents
Advertisement
Adjusting the position of the gearchange
and rear brake pedals
The position of the gearchange and rear brake pedals
in relation to the footrests can be adjusted to suit the
requirements of the rider.
Adjust the pedals as follows:
Gear change pedal
Hold linkage (1) using the special flat (A) and loosen
nut (2).
1
2
A
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the desired
Fig. 146
position.
Tighten nut (2) onto linkage.
242
Advertisement
Table of Contents
