Adjusting the position of the gearchange
and rear brake pedals
Gear change pedal
The position of the gearchange and rear brake levers
in relation to the footpegs can be adjusted to suit the
requirements of the rider.
To adjust the position of the gearchange lever,
proceed as follows: hold the linkage (1) and slacken
the lock nuts (2) and (3).
Note
Nut (2) has a left-hand thread.
Fit an open-end wrench to hexagonal element of
linkage (1) and rotate until setting pedal in the desired
position. Tighten both lock nuts onto linkage.
158
2
1
Fig. 87