Optional Swivel Belt Clip; Contents; Attachment; Detachment - Icom IC-M90E Instruction Manual

■ MB-86 contents
Belt clp ................................................................................ 1
Base clp .............................................................................. 1
Suppled screws .................................................................. 2

■ Attachment

q Screw the base clp to the back of the transcever usng
the two screws (suppled), as shown below.
Supplied screws
w Clp the belt clp over your belt and nsert the transcever.

OPTIONAL SWIVEL BELT CLIP

e Once the transcever s locked n place, t swvels as llus-
trated below.
Qty.

■ Detachment

Turn the transcever upsde down n the drecton of the
➥
arrow and pull out from the belt clp.
CAUTION:
HOLD THE TRANSCEIVER TIGHTLY, WHEN HANGING OR
DETACHING THE TRANSCEIVER FROM THE BELT CLIP�
Otherwse the transcever may not be attached to the belt
clp or swvelled properly f the transcever s accdentally
dropped and the base clp s scratched or damaged.
10
9
10
26