Site Preparation; Working Area; Environmental Requirements; Floor Requirements - Konica Minolta KM256 Manual

CPU: Intel Core Duo 2.50GHZ or above
Memory card: 2.00GB or above
Motherboard: INTEL G41 or above
Operating System: WINDOWS XP/VISTA/7 or above Microsoft operating systems
PC's configure has a direct relation with the printer speed and stability

2-2 Site preparation

Customers are required to comply with the installation requirements and implement it for
the machine operation.
Sites and environment will directly affect the stability of the printer.

2-2-1 Working area

Listed below of working area is close to the Printer180 series photo machine (here in after
referred to as Machine) area, as shown. Emphasized that users should ensure that the
safety of operating staff within this region.
The scope of the working area are the length 7meters, width 4meters and height of
3meters.
Printer 3.2 series printers (1.8meter width) Dimensions: length 3.8 m, width 2.5m, height
2.5m.

2-2-2 Environmental requirements

Equipment should be away from the joint devices (fabric connected machine), or other
radio frequency interference. Floor should be easy cleaning and does not cause dust and
static electricity. In order to help operators and customers determinning the accuracy of
color, the environment should be neutral or gray color decoration and use of light
(fluorescent) lighting.
Machine should be installed in a clean, dustless, temperature and relative humidity
controlled environment within the following:
Altitude: below 1,000 meters sea level
Temperature: 15-35C
Relative Humidity: 40% -65%
Note: When the machine printing pictures, please do not use other USB devices such as U
disk or hard disk.

2-2-3 Floor requirements

Ground material in work area should be able to guarantee security system weight evenly
dispersed, during the installation process, the system should maintain accurate level to
ensure the print head moving correctly, in case of sliding and bending.
Floor in working area must prevent static and dust accumulation, if
necessary, laying a clean polished concrete floor tiles before
installation, do not make flooring
Cautions！
materials
like carpet
5