The Introduction To The Print Information - Konica Minolta KM256 Manual

Add print job
Delete print job
Start to print
pause to print
stop to print

6-2-2 The introduction to the print information

The print information bar is showing in the picture above. From left to right successively is
print origin position、 step adjust、 print pass number、 the speed of carriage、 unidirection- bidirection
choose、file set. explaintion as following:
origin
the White edge number
step
step;when it leak white(white line),reduce the step.
When print job 360*360DPI,this setting up option can choose 2、 4、 8PASS;when print 360*720DPI
and 720*720DPI can choose 4 、8PASS; when print 360*540DPI、720*540 can choose3、6、
12PASS;when print 360*1080DPI、 720*1080DPI can choose 6、 12PASS; when print 360*1440DPI
can choose 8 PASS.
Middle sped
Setting the speed of the carriage, there are three mode :high speed、middle speed、low speed
bidirection
setting unidirection- bidirection, getting in this option is bidirection
print ;getting rid of this option is unidirection print.
Use file setting
gray color. For example, print 360*1080,getting in this option will default to print in 6PASS.
Nozzle check
cleaning
move left
Move right
feeding
Set the origin means the position of print starting also we call it as
Adjust the step of printing, when it overlap(black line), add the
when set PASS value, it can set according to the job precision from RIP.
use file setting: PASS value、speed、and unidirection- bidirection are all
39
quit media
Carriage return
origin(0 site)
Set print site
Compile print site
to