Table of Contents
Advertisement
2-2-4 Load-bearing requirements
Net weight of 200-250KG
Machine largest volume materials is 60KG
Proposed to install the machine in four plate 20cm in diameter, or four 200 x 200mm or
more than 8mm thick steel plate
2-2-5 Requirements for space reservations
The front of equipment means the input side of printing. Equipment requires 1m
reservation in front, 0.5m on the back, 0.5 m in the left and right side. Besides, the space
reserved also includes the height of 2.5 meters above the ground. In addition, the machine
should also leave space for before and after for the loading screen, and supplies.
2-2-6 Safety requirements
Fire preventing
Ink and solvent must be packed in special non-combustible liquid storage cabinets or
separate storage room, and must be made clear identity to meet the professional
requirements of safety regulations.
The storage of ink and solvent must strictly abide by local ink storage use and storage of
fuel on the fire safety regulations.
Carbon dioxide and dry powder fire extinguishers should be placed in the obvious channel
and easy to take. They should be located in near equipment and non-flammable liquid
storage cabinet (room), in accordance with local regulatory requirements.
Ventilation
To prevent the accumulation of volatile gas causes danger, the place must be well
ventilated to ensure the working area air circulating 6 to 8 times per/hour, vents should be
low enough to prevent the vapors accumulating on the nearby floor.
When the media pass through the dryer, we need a exhaust system to drain away the
solvent gas evaporating from the ink..
Note: As the solvent gas is higher proportion than the air, it will accumulate nearby the
6
Hide quick links:
Advertisement
Table of Contents
