Table of Contents
Advertisement
2 (2892)
Check the scanner with the computer which meets the system requirements in the last page of this check
list.
The driver software DiMAGE Scan Elite 5400 II supplied with the product is necessary for check. If this
driver is not installed in the computer, please install it beforehand.
PERFORMANCE
Outline
Basically, 2892 performance will be checked accordingly as below.
Scan: Scan the chart and save the image with the driver software.
Measure: Take in the image and measure the data with the Adjustment program.
Check: Output the data in the excel sheet and check the performance.
Chart and check items:
Scanner gauge chart: magnification, skew, color registration, pitch accuracy, frequency
Color chart: output density, grayscales, color balance, color reproduction
The following procedure describes the method in detail.
Scanner Gauge Chart
Preparation
2892 Adjustment Program FD
2887 Adjustment Program CD
DiMAGE Scan Elite 5400 II (CD)
Scanner Gauge Chart (35mm)
Slide Mount Holder (SH-M20)
Microsoft Excel
Installation
1. Drag and copy "DiMAGEScan.ini" in the 2892 Adjustment Program FD to the folder where
the DiMAGE Scan Elite 5400 II is installed. (C: Program Files \DS_Elite_2)
If the driver software DiMAGE Scan Elite 5400 II is not installed yet, please install the
driver software first.
Be sure to remove the DiMAGEScan.ini from the folder after scanning the chart.
Otherwise images will be underexposed or error message will appear when scanning
images other than the scanner gauge chart.
2. Double click the Setup.exe at "CD:Scanner Gauge Chart Evaluate \DISK1 in the 2887
Adjustment Program CD. Installation will start automatically.
If 2887 Adjustment Program is launched on your computer, the above procedure is not
necessary.
CAUTION:
The dialog box below may appear under the English environment OS, but the
program completes the installation successfully and will restart the PC
appropriately. Click the following point "A".
characteristic
Ａ Ａ Ａ Ａ
Advertisement
Table of Contents
