Konica Minolta KM256 Manual page 32

As showing in the picture,there are two switch for feeding system. The switch
marked 0 and 一 is two section switch. The switch marked "一"0"二" is three
section switch. When the media is installed and start to print, please open the
two section switch to "0" ; please open the three section switch to"二" . After
printed,cut the media. If need to collect the media,please open the two section
switch to "一" and open the three switch to"一". If don't need to feed
automatically, please open the switch to "0".
Media system (E /S machine)
28