Konica Minolta KM256 Manual page 69

Software_No Device
Software_Parser
Software_Print Mode Print
Software_Shake hand Software validation
UI Error_Get HW
Setting Fail
UI Error_Load Set
From Board Fail
UI Error_Set
Password Fail
UI Error_Update Fail Upgrade failed
Up date
Display_Failed
Update
Error_Version No
Match
Update Error_Wrong
File
Open the USB error
Incorrect print file
format
mode
parameters. error
of erroneous
firmware
Get hardware set
failure!
Loading KONICA
settings error!
Set password
failed!
Upgrade failed
Hardware and
firmware version
mismatch..
The upgrade file
format error.
65
1check the pass word
2.reset the pass word
3.replace the main
board
1.check up data file；
2.up date again
3.replace main board
1 check the upgrade file
is correct;
2 upgraded;
3replacement main
board
1 upgrade file and the
hardware does
match, replacing
upgrade file
1 upgrade file error,
replace the wrong
upgrade file format
not
the