Table of Contents
Advertisement
25
Changing settings
– Laser: The focus is based on a laser distance measurement. The laser is on when
the camera is autofocusing.
◦ Continuous autofocus: This setting is used to enable/disable continuous autofocus.
• Display settings: This submenu includes the following settings:
◦ Screen rotation: This setting defines if the orientation of the overlay graphics will
change according to how you hold the camera.
Note You can also enable/disable screen rotation on the swipe-down menu. For
more information, see section 9.5 Swipe-down menu, page 25.
◦ Image overlay information: This setting specifies what image information the camera
will display as an overlay on the image. For more information, see section 9.6 Image
overlay information, page 25. You can select the following information to display:
– Date & time.
– Emissivity.
– Reflected temperature.
– Distance.
– Relative humidity.
– Atmospheric temperature.
Note This setting only specifies what information to overlay on the image. All im-
age information is always saved to the image file and is available in the image
archive.
◦ Screen brightness: The screen brightness slider is used to control the brightness of
the screen.
Note You can also control the screen brightness on the swipe-down menu. For
more information, see section 9.5 Swipe-down menu, page 25.
• Geolocation: This submenu includes the following settings:
◦ GPS: This setting is used to enable/disable the GPS.
• Lamp & laser: This submenu includes the following settings:
◦ Enable lamp & laser: This setting is used to enable the camera lamp and the laser.
◦ Enable lamp & laser + Use lamp as flash: This setting is used to enable the flash
function. When the flash function is enabled, the camera lamp will flash when an im-
age is saved.
◦ Disable all: This setting is used to disable the camera lamp, laser, and flash function.
• Auto power off: This setting defines how soon the camera is automatically turned off.
Available choices are Off, 5 min, and 20 min.
• User interface options: This submenu includes the following settings:
◦ Manual adjustment mode: This setting specifies the type of manual image adjust-
ment mode. Available options are Level, Max, Min and Level, Span. For more infor-
mation, see section 14.3 Adjusting the infrared image, page 56.
◦ Emissivity mode: This setting specifies how the measurement parameter emissivity
will be entered. Available options are Select values and Select from materials table.
For more information, see section 14.6 Changing the measurement parameters,
page 61.
◦ Screening mode: This setting is used to enable/disable screening mode. For more
information, see section 21 Screening alarm, page 92.
• Volume: The volume slider is used to control the volume of the built-in speaker.
• Reset options: This submenu includes the following settings:
#T810253; r. AA/42549/42549; en-US
101
Advertisement
Table of Contents
