Table of Contents
Advertisement
21
Screening alarm
10. Aim the camera toward more points of interest. Sample 10 times to build up a sample
base by pushing the programmable button
The alarm is now set up and ready to use. Occasionally record a few samples if the
alarm is used for a long time or if the conditions change.
Note
• Every time you push the programmable button
Make sure you aim the camera toward an object within the interesting temperature
range when you push (and hold) the button.
• The algorithm has a memory of the last 10 samples. It discriminates between the high-
est and lowest values, and calculates an average of the remaining values.
• Do not modify the measurement setup or activate another alarm because this will deac-
tivate the screening alarm.
#T810253; r. AA/42549/42549; en-US
above the screen.
above the screen, a sample is saved.
93
Advertisement
Table of Contents
