Service Menu; How To Open The Service Menu; Service Adj Menu Screen - Panasonic AJ-D400P Service Manual

1. Service Menu.

< How to open the Service Menu >
Press SHIFT , UP and DOWN button on the Right Side Panel simultaneously, then set Menu switch to SET side
for open the Service Menu.
How to change the setting on each item, how to select the item, how to Page up and down, which are exactly same
method as User and Engineer menu.
Service menu has 4 kinds of menu screens. And basically Service menu allows service personal to service this
model. Adjustment procedures give a detail of how to use.
This menu sets the modes for servicing
ITEM
GAMMA (SERV)
R GAMMA (SERV)
B GAMMA (SERV)
TEST PULSE
ECU CONNECT
CONCEAL
INNER ECC
OUT ECC
IF ADJ
SERVO MODE

[ SERVICE ADJ MENU SCREEN ]

SERVICE ADJ
GAMMA(SERV)
R GAMMA(SERV)
B GAMMA(SERV)
TEST PULSE
ECU CONNECT
CONCEAL
INNER ECC
OUTER ECC
IF ADJ
SERVO MODE
RANGE
ON/OFF ON
-10 ~ +10
-10 ~ +10
ON/OFF OFF
ECU/EVR ECU
ON/OFF ON
ON/OFF ON
ON/OFF ON
ON/OFF OFF
ATF/CTL ATF
: ON
: -----
: -----
: OFF
: ECU
: ON
: ON
: ON
: OFF
: ATF
PRESET
GAMMA setting become effective.
Setting of Rch GAMMA.
Setting of Bch GAMMA.
TEST PULSE becomes available.
ECU: Connection with ECU connector.
EVR: Connection with EVR connector.
Turn ON when adjusting VTR I/F.
Selection of SERVO MODE.
REMARK