7-
5. Removal of Drum Unit
After removing the mechanical chassis according to 7-4,
Lift up the flexible cable for remove the 3 screws as
shown as below figure. Disconnect the connector (A)
and the 3 screws (A).
Screw(A)
Remove the 2 screws and remove the T1 Guide.
Remove the screw (B) and the drum unit with care not to
scratch the cable (A).
Screw(B)
Cable(A)
Screw(C)
Connector(A)
7-6. Removal of Cassette Up Unit
After removing the left side panel according to 7-2.,
loosen the 4 screws (A) and remove the panel.
Screw(A)