Vtr Section; Video Main & Video I/F; Audio Vco Adjustment; Da C Level Adjustment (For Ntsc Only) - Panasonic AJ-D400P Service Manual

<VTR Section>
6. Video Main & Video I/F

6-1. Audio VCO Adjustment

BOARD Video Main
SPEC. A = B ± 5%
TEST TP8 (VCO ADJ.)
ADJUST EVR
INPUT CAMERA Colour Bar
MODE EE
M.EQ Oscilloscope
Menu Setting
1. Open the operation panel.
2. Pressing [SHIFT], [+] and [-] buttons, set MENU
switch to SET position.
3. Set as follows:
PAGE : FUNCTION 3/5
REC SIGNAL
ECU CONNECT
PAGE : SERVICE ADJ.
IF ADJ.
EVR Setting
CMD : 02 DATA : 82
1. Press [®] or [¬] key in EVR so that A equals to B.
A
: CAM (NTSC only)
: EVR
: OFF
ADR : 04
B
6-2. DA C Level Adjustment
(for NTSC only)
BOARD Video Main
SPEC. A = 0.30 ± 0.02V
TEST TP4 (DA C)
ADJUST EVR
INPUT CAMERA Colour Bar
MODE PLAY
M.EQ Oscilloscope
Menu Setting
1. Open the operation panel.
2. Pressing [SHIFT], [+] and [-] buttons, set MENU
switch to SET position.
3. Set as follows:
PAGE : FUNCTION 3/5
REC SIGNAL
ECU CONNECT
PAGE : SERVICE ADJ.
IF ADJ.
EVR Setting
CMD : 02 DATA : ??
1. Press [®] or [¬] key in EVR so that the level A is
within specification.
A
: CAM (NTSC only)
: EVR
: OFF
ADR : 03