Specifications
VTR Section
Accessories
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.
VTR Video System
Bands:
S/N ratio:
K factor (2T pulse):
Y/C delay:
VTR Audio System
Sampling frequency:
Quantization:
Frequency response:
Dynamic range:
Distortion:
Wow/flutter:
Head room:
Emphasis:
VTR Tape Running System
Tape speed:
Recording/playback time:
FF/REW time:
Connectors
Input
AUDIO IN CH1/CH2
(XLRX2, 3-pin, female):
MIC IN (XLR, 3-pin, female):
GENLOCK IN (BNC):
Output
CAMERA OUT (BNC):
VIDEO OUT (BNC):
AUDIO OUT (CH1/CH2/MIX)
(XLR, 3-pin, male):
PHONES (mini-jack∑1):
Other
DC IN (XLR, 4-pin, male):
DC OUT (4-pin):
LENS (12-pin):
REMOTE (ECU, 6-pin):
Microphone kit
Tripod attachment
Sony battery connector (screw included)
126 (E)
(during playback on a standard playback unit)
Brightness; 25 Hz to 5.75 MHzo1.0 dB/p3.0 dB
55 dB
Within 2%
Within 30 ns
(during playback on a standard playback unit)
48 kHz (synchronized to video)
16-bits/sample
20 Hz to 20 kHzt1.0 dB (at reference level)
80 dB or more (at 1 kHz, AWTD)
Within 0.1% (at 1 kHz, operating level)
Below measurable limit
18 dB
T1r50 Øs, T2r15 Øs (can be turned ON/OFF)
33.854 mm/s
Approx. 66 min. (using the AJ-P66MP)
Approx. 3 min. (using the AJ-P66MP)
MIC/LINE switchable, balanced, more than 10 kohm
MIC; Menu setting to p60/p50/p40 dBu
LINE; Menu setting to p6/0/o4 dBu
Phantom o48 V, balanced, 3 kohm
Menu setting to p60/p50/p40 dBu
1.0 Vp-p, 75 ohm
1.0 Vp-p, 75 ohm
1.0 Vp-p, 75 ohm
0 dBu, balanced, low-impedance
(Menu setting to CH1/CH2/MIX)
DC 11 to 17 V
DC 11 to 17 V, maximum rated current; 0.1 A