Firmware Upgrade; Using Rs-232 - CipherLab Cobia User Manual

FIRMWARE UPGRADE

USING RS-232

1) Connect the RS-232 cable between the scanner and the computer, and join the power
supply cord.
2) Read the following barcodes in sequence to configure the scanner to use RS-232 as
download interface.
3) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
Enter Setup
Activate RS-232
115200 bps
Enter Setup
Update
Appendix I
Update
Download
173