Transmit Check Digit; Code Length Qualification - CipherLab Cobia User Manual

3.3.3 TRANSMIT CHECK DIGIT

Decide whether to include the check digit in the data being transmitted.

3.3.4 CODE LENGTH QUALIFICATION

To prevent the "short scan" error, define the "Length Qualification" settings to ensure
that the correct barcode is read by qualifying the allowable code length.
If "Max/Min Length" is selected, the maximum length and the minimum length must

be specified. It only accepts those barcodes with lengths that fall between max/min
lengths specified.
If "Fixed Length" is selected, up to 2 fixed lengths can be specified.

Note: The specified length(s) must include the check digit(s) the barcode contains.
1) Read the barcode to enable either Max. /Min. Length qualification or Fixed Length(s)
qualification.
2) Read the barcode for Max. Length or Fixed Length 1, and follow steps 3~4.
Repeat steps 2~4 for Min. Length or Fixed Length 2.
Chapter 3 Changing Symbology Settings
*Transmit
Interleaved 25
Check Digit
Do Not Transmit
*Enable Max./Min.
Length (1~127)...
Enable Fixed
Length(s)...
Update
73