Code Id; Select Pre-Defined Code Id - CipherLab Cobia User Manual

1504B Barcode Scanner

4.4 CODE ID

Up to two characters for Code ID can be configured for each symbology. To make the
Code ID configuration easier, the scanner provides five pre-defined Code ID sets that can
select one and make necessary changes on it.
If "Keyboard Wedge" or "USB HID" is configured for interface,

Status will then become applicable. Decide whether to apply Key Status when select
"Normal Key" for Key Type.
Key Type
Scan Code Only 1 scan code value is allowed.
Normal Key Up to 2 character strings are allowed.
Note: "]C1" is the Code ID of GS1-128 (EAN-128) barcodes; "]e0" is the default Code ID
of GS1 DataBar (RSS) barcodes.

4.4.1 SELECT PRE-DEFINED CODE ID

126
User Guide
Key Status
N/A
 Add Shift
 Add Left Ctrl

Add Left Alt
 Add Right Ctrl
 Add Right Alt
Refer to Keyboard Wedge
Apply Code ID Set 1
Apply Code ID Set 2
Apply Code ID Set 3
Apply Code ID Set 4
Apply Code ID Set 5
Enter Setup
Key Type and Key
Table.