Beeper; Beeper Volume - CipherLab Cobia User Manual

1504B Barcode Scanner

1.4 BEEPER

The scanner has a buzzer to provide user feedback in various operating conditions.
Beeping
One long beep, high tone
One short beep, high tone
 Programmable, default to 4 KHz
Six short beeps

High-low tone repeats three times
Two beeps, low-high tone
Two beeps, high-low tone
One short beep, high tone
One short beep, low tone
One long beep, low tone
Two long beeps, high-low tone

1.4.1 BEEPER VOLUME

20
User Guide
Meaning
Power on, with red LED on (1 second) and off quickly
Good Read, with green LED on-off quickly



RS-232/USB Virtual COM connection fails (data saved in
Transmit Buffer), with red LED on-off quickly
More setup barcode required
More barcodes required to complete the "output
sequence" requirements of Multi-Barcode Editor, with
green LED on-off quickly (Upon completion, same as
Good Read.)


Multi-Barcode Mode – Buffer full
Enter Configuration Mode, with red LED flashing
Exit Configuration Mode
Setup barcode read successfully
Transmit buffer full, with red LED on-off quickly
Configuration error (Wrong barcode...)
Mute
Minimum Volume
Medium Volume
*Maximum Volume
Enter Setup