Firmware Upgrade - CipherLab 1500 Series User Manual

FIRMWARE UPGRADE

1) Use the RS-232 cable to connect the scanner to the serial port of PC and join the
power adaptor to the RS-232 connector.
2) Read the following barcodes in sequence for the scanner to enter the download mode.
The scanner will respond with beeps to indicate it is ready for downloading.
3) Run the download utility "ProgLoad.exe" on your computer.
Kernel Program
K1500_V*.shx
Note: The output interface will be reset to your previous settings, which may be
Keyboard Wedge, RS-232 or Wand Emulation.
Enter Setup
User Program
STD1500_V*.shx
 For the
"RS-232" and the correct COM port.
 Select 115200 bps for the baud rate setting.
 For the file option, click [Browse] to select
the target file for firmware update.
 Click [OK].
Update
Appendix I
Download
communication settings, select
163