Indicator Lamp In The Charging Station - McCulloch ROB R600 Operator's Manual

Message
Next start hh:mm
The day's mowing is
complete
Lifted
Collision sensor prob-
lem, front/rear
Wheel drive problem,
right/left
Alarm! Mower switch-
ed off
Alarm! Mower stopped The alarm was activated because the mower
Alarm! Mower lifted
Alarm! Mower tilted
Temporary battery
problem
Charging current too
high

Indicator lamp in the charging station

For a fully functional installation, the indicator lamp in the charging station must emit a solid green light. If something else
appears, follow the troubleshooting guide below.
If you still need help with troubleshooting, please contact your local McCULLOCH representative.
Light
Solid green light
Green flashing light
40
Cause
The timer setting prevents the robotic lawn-
mower from operating.
The rest period is in progress. The robotic
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
The rest period is in progress. The robotic
lawnmower has an inbuilt standby period ac-
cording to the Standby time table.
The lift sensor has been activated as the mow-
er has become trapped.
Mower body can not move freely around its
chassis.
Grass or other object is wrapped around the
drive wheel.
The alarm was activated because the mower
was switched OFF.
was stopped.
The alarm was activated because the mower
was lifted.
The alarm was activated because the mower
was tilted.
Temporary battery or software related issue in
the mower.
Wrong or faulty power supply unit.
Cause
Everything in order
The signals are good and
ted.
Action
Change the timer settings. See
23 .
This behaviour is normal and no action is re-
quired. See
This behaviour is normal and no action is re-
quired. See
Free the mower.
Check that the mower body can move freely
around its chassis.
Clean the wheels and around the wheels.
Adjust the mower security level in the Security
menu.
Restart the mower. Disconnect and reconnect
the battery.
The message may require action by authorized
service technician.
Action
No action required
ECO mode is activa-
No action required. For more information on
ECO mode , see Settings on page 27 .
Timer on page
Standby on page 33 .
Standby on page 33 .
175 - 001 - 17.03.2017