Timer - McCulloch ROB R600 Operator's Manual

In some of the submenus there is information to the right
of specific rows. This information indicates which selection
has been made for the function.
Menu structure
The following table summarises the menu selections found in the main menu. The following chapter provides more de-
tailed information about how each function is used and which setting options are available.

Timer

The lawn should not be cut too often to obtain the best mowing result. Consequently, it is important to
limit the operating time using the timer function if the working area is less than the robotic lawnmower's
working capacity. The timer function is also an ideal tool to control which periods the robotic lawnmower
should not mow, for example, when the children are playing in the garden.
Installation
Only for ROB R1000
This menu function is used to steer the robotic lawnmower to remote parts of a working area. For many
working areas there is no need to alter the factory settings, but depending on the lawn complexity the
mowing result can be improved by making manual settings.
Security
In this menu, settings relating to security and the connection between the robotic lawnmower and the
charging station can be made.
There are three security levels to choose from but it is also possible to define your own combination of
security functions.
Settings
This selection allows you to make changes to the general robotic lawnmower settings such as date and
time.
Timer
TIMER
Work hours 1
Work hours 2
Work days
Reset timer
The lawn should not be cut too often to obtain the best
mowing result. Consequently, it is important to limit the
operating time using the timer function if the working area
is less than the robotic lawnmower's working capacity.
When the robotic lawnmower is allowed to mow too much,
the lawn may appear flattened. Besides, the robotic
lawnmower is subjected to unnecessary wear.
The timer function is also an ideal means to control which
work hours the robotic lawnmower should not mow, for
example, when the children are playing in the garden.
175 - 001 - 17.03.2017
ROB R1000 has an inbuilt standby period of about 4 hours
a day and ROB R600 has an inbuilt standby period of
about 11 hours per day. The robotic lawnmower is parked
in the charging station during this period. See
page 33 .
The factory setting of the
pm) Mon - Sun. If setting the timer manually, calculate that
the robotic lawnmower mows about the listed amount of
the number of square meters per hour and day listed in
table Work capacity.
The table below provides suggestions for different timer
settings depending on garden size. The table can be used
to set the operating time. The times should be seen as
indicative. They may need to be adjusted to suit the
garden and for example grass quality and growth. Use the
table as follows:
• Find a work area that closest matches the garden's
area.
• Select an appropriate amount of work days per week
(for some work areas 7 days may be needed).
• Work hours per day shows how many hours a day the
robotic lawnmower will be allowed to work for the
selected amount of work days.
Standby on
Timer is 07:00 - 23:00 (7 am - 11
23