McCulloch ROB R600 Operator's Manual page 6

The STOP button on the top of the robotic lawnmower is
mainly used to stop the robotic lawnmower when it is
running. When the STOP button is pressed a hatch opens,
behind which there is a control panel. The STOP button
remains pressed in until the hatch is closed again. This
acts as a start inhibitor.
The control panel on the top of the robotic lawnmower is
where you manage all the robotic lawnmower settings.
Open the control panel hatch by pressing down the STOP
button.
When the main switch is set to position 1 for the first time,
a start-up sequence begins which includes language
selection, time format, date format and the four-digit PIN
code and setting the time and date. See
calibration on page 21 .
Movement pattern
The robotic lawnmower's movement pattern is irregular
and is determined by the robotic lawnmower itself. A
movement pattern is never repeated. With the mowing
system the lawn is mown equally without any mowing lines
from the robotic lawnmower.
4
Search method
The guide wire is a wire that is laid from the charging
station towards, for instance, a remote part of the working
area or through a narrow passage to be then connected
with the boundary wire. For more information, see
Installation of the guide wire on page 18 .
The robotic lawnmower starts to search for the charging
station when the battery charge becomes too low. The
robotic lawnmower does not mow when it is searching for
the charging station.
When the robotic lawnmower searches for the charging
station, it first searches irregularly for the guide wire. Then
it follows the guide wire to the charging station, turns
around just in front of the station and backs into it.
First start-up and
175 - 001 - 17.03.2017