McCulloch ROB R600 Operator's Manual page 44

Symptoms
Uneven mowing re-
sults.
The robotic lawnmow-
er runs at the wrong
time
The robotic lawnmow-
er vibrates.
The robotic lawnmow-
er runs, but the blade
disc does not rotate.
The robotic lawnmow-
er mows for shorter
periods than usual be-
tween charges.
Both the mowing and
charging times are
shorter than usual.
The robotic lawnmow-
er is parked for hours
in the charging station.
42
Cause
The robotic lawnmower works too few hours
per day.
Proportion setting is incorrect in relation to
The
the layout of the working area.
The shape of the working area requires the use
Remote start 1 and Remote start 2 for
of both
the robotic lawnmower to find its way to all re-
mote areas.
Working area too large.
Dull blades.
Long grass in relation to the set cutting height.
Accumulation of grass by the blade disc or
around the motor shaft.
The robotic lawnmower clock needs to be set.
The start and stop times for mowing are incor-
rect.
Damaged blades lead to imbalance in the cut-
ting system.
Many blades in the same position lead to im-
balance in the cutting system.
The robotic lawnmower searches for the charg-
ing station.
Grass or other foreign object blocks the blade
disc.
The battery is spent.
The robotic lawnmower has an inbuilt standby
period according to the Standby time table. See
Standby on page 33 .
The hatch has been closed without the START
button first being pressed.
Action
Increase the mowing time. See
23 .
Proportion value is se-
Check that the correct
lected.
Remote start 2 to steer the robotic
Also use
lawnmower to a remote area. See
ROB R1000 on page 25 . Applies to McCUL-
LOCH ROB R1000 only.
Try limiting the working area or extending the
Timer on page 23 .
working time. See
Replace all the blades and screws so that the
rotating parts are balanced. See
blades on page 36 .
Increase the cutting height and then succes-
sively lower.
Check that the blade disc rotates freely and
easily. If not, screw off the blade disc and re-
move grass and foreign objects. See
on page 35 .
Time & Date on page 27 .
Set the clock. See
Reset the start time and stop time settings for
mowing. See Time & Date on page 27 .
Inspect the blades and screws and replace
Replacing the blades
them if necessary. See
on page 36 .
Check that only one blade is fitted at each
screw.
No action The blade disc does not rotate when
the robotic lawnmower is searching for the
charging station.
Remove and clean the blade disc. See
ing on page 35 .
Replace the battery. See
on page 36 .
No action.
Open the hatch, press the START button and
then close the hatch.
Timer on page
Installation -
Replacing the
Cleaning
Clean-
Replacing the battery
175 - 001 - 17.03.2017