Starting; Stopping - McCulloch ROB R600 Operator's Manual

ROB R600
Operation
Charging/Standby
Example 2
The times used in this example are applicable to ROB
R600 , but the principle is the same for the other models.
Work period 1: 06:00 - 17:00
Work period 2: 20:00 - 22:00
Work days: All days.
The robotic lawnmower will operate between 06:00 and
17:00. It will begin again at 20:00 and stops running at
22:00 to rest until it starts again at 06:00.
34
A = Max 13 h
B = Min 11 h
ROB R600
Operation
Charging/Standby

Starting

1. Press the STOP button to open the hatch.
2. Set the main switch to position
3. Enter the PIN code.
4. Push the START button.
5. Shut the hatch within 10 seconds.
If the robotic lawnmower is parked in the charging
station, it will only leave the charging station when the
battery is fully charged and if the timer is set to allow
the mower to operate.
Note: Before the blade disc starts, 5 beeps are heard for 2
seconds.

Stopping

1. Press the STOP button.The robotic lawnmower stops,
the blade motor stops and the hatch opens.
A + C = Max 13 h
B + D = Min 11 h
1 .
175 - 001 - 17.03.2017