Settings - McCulloch ROB R600 Operator's Manual

This function means that the robotic lawnmower requests
a PIN code when the main switch is set to
the cover is opened. The correct PIN code must be
entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession the
robotic lawnmower is blocked for a time. The blockage
time is extended for every new incorrect attempt.
Alarm
This function means that an alarm sounds if the PIN code
is not entered within 10 seconds after the STOP button
has been pressed or the robotic lawnmower has been
lifted up for any reason. A ticking noise indicates that the
PIN code must be entered to prevent triggering the alarm.
The alarm can be turned off at any time by entering the
correct PIN code.
New loop signal
The loop signal is randomly selected to create a unique
link between the robotic lawnmower and the charging
station. In rare cases, there may be a need to generate a
new signal, for instance if two adjacent installations have a
very similar signal.
1. Place the robotic lawnmower in the charging station.
New loop signal in the menu and press OK .
2. Select

Settings

SETTINGS
ECO mode
Time & Date
Language
Country
Remote start (R600 only)
Calibrate guide (R600 only)
Reset user settings
About
ECO
This function automatically turns off the loop signal in the
boundary loop, the guide wires and the charging station
when the robotic lawnmower is not mowing, i.e. when the
lawnmower is charging or is not allowed to mow due to
timer settings.
ECO mode is suitable to use where there is other
The
wireless equipment not compatible with the robotic
lawnmower e.g.certain hearing loops or garage doors.
When the loop signal is turned off due to the
the indicator lamp in the charging station flashes green.
When the indicator lamp flashes green the robotic
lawnmower can only be started in the charging station and
not out in the working area.
175 - 001 - 17.03.2017
ECO mode , it is very important to always press the
In
1 and each time
STOP button before removing the robotic lawnmower from
the charging station. In
possible to start the robotic lawnmower. If the lawnmower
has been removed by mistake without first pressing the
STOP button, the lawnmower must be placed back in the
charging station and the STOP button pressed. Only then
can the robotic lawnmower be started inside the working
area.
Note: Always press the STOP button before removing the
robotic lawnmower from the charging station. In
mode the robotic lawnmower otherwise will not be started
inside the working area.
Select
mode .
Time & Date
This function allows you to set current time and required
time format in the robotic lawnmower.
•
•
•
•
Language
Set language with this function.
To select language: Place the cursor at the required
language and press
Country
With this function you can select in what country the
robotic lawnmower will work.
Place the cursor at the required country and press
Remote start, ROB R600 only
One important function with the guide wire is the capacity
ECO mode ,
to steer the robotic lawnmower to remote garden areas
when required. This function is very useful in gardens
where, for instance, the front and back are joined by a
narrow passage where the charging station cannot be
installed.
ECO mode it is otherwise not
RUN ECO mode and press OK to activate ECO
Time & Date Set time
Set date
Time format
Date format
Set time: Enter the correct time and press OK to exit.
Set date: Enter correct date and press OK to exit.
Time format: Place the cursor at the required time
OK to exit.
format: 12h 24h. Press
Date format: Place the cursor at the required date
format:
YYYY-MM-DD (year-month-day)
MM-DD-YYYY (month-day-year)
DD-MM-YYYY (day-month-year)
OK .
Exit by pressing
OK .
ECO
OK .
27