Advertisement
Installing the main monitor station
Note:
L� I f a position of installation for the main monitor station is specified, install the mounting bracket to one of the following
positions.
1
Install the mounting bracket to the wall securely.
Note:
L� I nstall the mounting bracket on the vertical and flat wall.
Wood screws (4 mm x 16 mm)
2
Attach the wires connected to the door station to the terminal connector.
L� C onnect the wire correctly according to the wiring schematic diagram on page 5.
L� W hile pressing on the button with a pointed object such as a screwdriver, insert the wire into the terminal connector.
L� I f you want to use your own power cable, see page 11.
Terminal connector
Button
Stripped end of
the wire
9 mm
Wire (Not included)
Mounting bracket
When your own power cable is connected, it
cannot be passed through this guide.
Wire from the door station
Position of installation for the main monitor station
83.5 mm
Wall
Installation
9
Advertisement
