Mahr Millimar C 1200 Operating Instructions Manual page 2

Dear customer,
Congratulations on choosing a product by Mahr GmbH. We kindly request that you follow the
instructions below to ensure the long-term precision of your measuring instrument.
We operate a policy of continuous improvement and are constantly developing our products.
Therefore, it is possible that there may be slight differences between the text and illustrations
in this document and the measuring instrument in your possession, especially with regard to
type designations. We reserve the right to make changes to the design and scope of supply,
the right to undertake further technical developments, and all rights relating to translation of
this documentation.
© by Mahr GmbH, Esslingen, Germany
The following symbols are used in these operating instructions:
General information
!
Important note
Caution, hazard
Failure to follow instructions marked with this symbol can cause inaccurate results and
lead to equipment damage.
Introduction
Permitted uses
The Millimar C 1200 is an electronic length measuring and evaluation instrument for use in
production. An inductive probe can be connected.
The operating, maintenance and repair information detailed in these operating instructions
must be followed.
To bring about the greatest benefits from this measuring instrument, you must read the
operating instructions before placing it into operation.
The scope of delivery of the length measuring instrument includes:
- Measuring instrument
- Power supply unit with interchangeable adapter
- Operating instructions
2
Mahr GmbH • Millimar C1200