Using The 3D And Layer Views - SeeMeCNC Rostock MAX v2 User Manual

The 3D View will show you the part that will be printed when you hit the Print button. The
Layer View is used to inspect how your part will be printed, one layer at a time.
The 3D View.
The 3D View will allow you to view your model in pretty much any orientation you'd like. The
view orientation is controlled one of two ways. You can select one of the movement icons
in conjunction with the left mouse button. The first icon will allow you to "free
rotate" the model and build platform. The second icon will allow you to move the
part and build platform left and right, as well as up and down. The third icon will allow you to zoom in
and out.
Rostock MAX v2 User's Guide
11 – Using the 3D and Layer Views
Using the 3D View and Layer View
11 – Using the 3D and Layer Views - 88