Configuring The Arduino Ide - SeeMeCNC Rostock MAX v2 User Manual

1.3 – Configuring the Arduino IDE
Before we can use the IDE to upload the firmware to the RAMBo controller, we need to tell the
Arduino IDE what kind of board we have and what communications port it needs to use in order to
perform the upload task.
Click on the "Tools" menu item and then click on "Board" and then "Arduino Mega or Mega
2560".
Fig. 1.3-1: Choosing the board type.
Next, you'll need to tell the Arduino IDE what port to talk to the RAMBo on. To do this, click on
"Tools", "Serial Port" and then choose the COM port that your RAMBo appears as on your computer.
Rostock MAX v2 User's Guide
Fig. 1.3-2: Choosing the Serial Port.
1 – Driver and Software Installation - 8