SeeMeCNC Rostock MAX v2 User Manual page 21

5 & 6. The Insert and Edit buttons allow you to add objects to the current print job as well as
manipulate them.
7. The Export button allows you to save the current state of the build plate in a few different file
formats. This feature will allow you to save GCODE to the SD card for stand-alone printing!
Go ahead and click on the Settings
& Controls button. The Settings &
Controls pane allows you to directly
control your printer, change its
configuration and change slicer settings.
The image on the right shows the
"Controls" portion of the display. (If you
look at the top, you'll notice
"CONTROLS" is highlighted.)
There's a lot going on with this
pane, so I'll go into more detail with it as
you need to use it as well as in a later
chapter.
Let's move on to getting your
printer ready to calibrate!
Rostock MAX v2 User's Guide
2 – Installing MatterControl and Calibrating the Printer - 21
Fig. 2.1-11: The Settings & Controls Pane.