Vdwall LVP615U User Manual page 72

LVP615U 使用说明
however, if the blue indicator blinks, it means there are no valid signal input.
AUTO：
VGA automatically adjust button, only available for VGA1, VGA2 and EXT.VGA.
Switching effect selection, can select cut (seamless switching) and fade in / fade out (0.5s
1s 1.5s) switching.
Switching mode:
Default switching mode is
input to relative signal;
TAKE
If select pre +
4) function and mode setup
The buttons in this area used for PIP, TEXT (Text Overlay), BYPASS, FREEZE, MOSAIC
PIP/PBP:
PIP switch, used to open or close PIP mode, meanwhile the bright point
above the button indicates the mode open or not.
M1 、 M2 、 M3:
PIP mode buttons, the blue bright point above the mode button shows
which mode you have selected.
TEXT:
text overlay display switch, used open or close text overlay function; meanwhile
the bright point above the button indicates the function is open or not.
BYPASS:
full and part display switch button, only available for PC signal VAG DVI HDMI
DP.
Freeze：
Image freeze switch button, it is available when under signal switch mode.
one key switch
switching, the signal area become the style as below,
, this moment press signal button, switch
72