Vdwall LVP615U User Manual page 49

LVP615U 使用说明
Automa
tic
splicing
menu
Manual
setup
menu
Enter adjustment setup: under splicing mode (Mosaic indicator lit up), by
pressing "Setup" button, LVP615U enters splicing adjustment setup menu "E.
Mosaic"
Return to upper level setup menu: under the mode of adjustment setup,
press " " button, LVP615U exits adjustment setup.
Note: when use multiple LVP615U cascading splicing, to make sure the output
image have uniformity, every unit's parameters of 4.3 brightness, 4.1 inpu color,
4.2 sharpness and 8.2 bias must be same.
Operation is as below:
When the input signal of LVP615U is DVI format and the splicing mode is open
(Mosaic indicator lit up), press Setup, LVP615U enters splicing menu. Press
↓button to select setup option needed to adjust, rotate knob to change
parameter, press OK button to save.
Operation is as below :
In the menus E.1~E.2, input parameters of whole splicing screen;
In the menus E.3~E.4,input the size and location (relative to whole splicing
screen) of LED screen the LVP615U drives;
In the menu E.7 sync. Mosaic menu, select to turn the function on or off;
E.5 unit horizontal
start
E.6 unit vertical start
E.7 sync. splicing
E.8 automatic
splicing
E.9 in width
E.10 in height
E.11 in H-start
E.12 in V-start
E.13 out width
E.14 out height
E.15 out H-start
E.16 out V-start
49
compared with the whole
spicing screen driven by
this unit of LVP615U
ON or OFF of the sync
splicing
Application of automatic
splicing parameters
The size and location of
DVI input image
current unit crops
Output parameters
LVP615U, it is as same
as the menu 1. Output
image
the
of