LVP615U 使用说明
Switching signal method: press input button to preselect first, LCD screen
displays the current input status and preselect input status. Then press Take
button to switch current input to preselect input. After the completion of
switching, preselect signal become the current input signal. The status of the
preselect signal indicator: when the signal is valid, the indicator flicker rapidly.
when the signal is invalid, the indicator flicker slowly.
Note : Pre.+Take switch only available for seamless switching. LVP615U
supports seamless switching between any two different input groups as follow.
Same group does not support seamless switching. For example, current input
is V1( V1 in group A). Then, preselect signal is only from B,C,D group. Signal
group as follow. :
V1、V2
5.1.3 Switching time setting(C/ F)
Curr. Input:
Curr. In Status:
Pre. Input:
Pre. In Status:
--------------------------------------
Output Size:
Output Start:
Switch Mode:
Switch Time:
A
B
VGA1、
VGA2
HDMI
1080p_60Hz
V1
PAL
1920x1080
(0,0)
Pre.+Take SW.
1.5 Sec
C
DVI、
HDMI、DP
21
D
EXT