LVP615U 使用说明
make sure these settings as below.
To achieve splicing function before entering Mosaic, need to
(1) The current input signal is DVI
(2) The resolution of DVI input signal must be as
same as the output resolution of processor
(3) Mosaic function is open correctly
Operation step described as the picture above:
(1) Input in relative parameters of actual screen
(2) Open synchronization mosaic, click automatic
mosaic,
automatically and apply it
(3) Confirm image splicing effect, if some problem,
adjust and amend the parameter APP calculated
out.
APP
calculates
108
the
parameters