Vdwall LVP615U User Manual page 35

LVP615U 使用说明
port to YPbPr.
Operation steps：
In the menu of
parameters and press "OK" to make them effective.
6.2.4 Signal switch mode
Press Setup to enter setup menu， press ↓ to select "2. Input video
signal"，Then press OK to enter"2.input video signal "，and press ↓ to
select signal
switch ",Press OK to apply.
2.5 V2 or YPbPr，rotate knob
switch mode"one
2.Input video signal
--------------------------------------
2.1 DVI EDID
2.2 V1/V2 backup
2.3 VGA1/VGA2 backup
2.4 HDMI/DVI backup
2.5 V2 or YPbPr
2.6 switch mode
35
to select needed
key switch "or
1280x1024_60
off
off
off
V2
Pre.+Take SW. ？
Pre.+Take