Vdwall LVP605 series User Manual
  1. Manuals
  2. Brands
  3. Vdwall Manuals
  4. Processor
  5. LVP605
  6. User manual

Vdwall LVP605 series User Manual

Led hd video processor
Hide thumbs Also See for LVP605 series:
Table of Contents

Advertisement

Quick Links

See also: Quick User Manual
LVP605 series
LED HD Video Processor
User Manual
SHENZHEN VDWALL CO., LTD.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LVP605 series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vdwall LVP605 series

Summary of Contents for Vdwall LVP605 series

  • Page 1 LVP605 series LED HD Video Processor User Manual SHENZHEN VDWALL CO., LTD.

  • Page 2: Table Of Contents

    LVP605 Series User Manual Content Chapter 1 Safety precautions..............03 Chapter 2 Item list..................04 Chapter 3 Hardware connection...............05 3-1 Rear view................05 3-2 Port description..............05 3-3 Connection diagram..............07 Chapter 4 Front panel.................08 4-1 Front view................08 4-2 Instructions................10 Chapter 5 Settings..................14 5-1Basic settings.................15 1.

  • Page 3: Chapter 1 Safety Precautions

    LVP605 Series User Manual Chapter 1 Safety precautions Danger There is high voltage in the processor, to prevent any unexpected hazard, unless you are a maintenance personnel, please do not open the cover of the device. Warning 1. This device shall not encounter water sprinkle or splash, please do not place anything containing water on this device.

  • Page 4: Chapter 2 Item List

    LVP605 Series User Manual Chapter 2 Item list Please unpack the product with care and check whether all the following items are included in the package. If anything is found missing, please contact the dealer. Standard accessories The accessories supplied with this LED Video Processor may differ from the figures contained in the User Manual, but they are applicable for the regions where you live.

  • Page 5: Chapter 3 Hardware Connection

    LVP605 Series User Manual Chapter 3 Hardware connection 3-1 Rear view Figure 3-1 Rear view 3-2 Port description 1) Video input signals (INPUT) LVP605 supports 10 video input signals as follows: Port Description V1~V3 3 X Composite Video (PAL /NTSC)
  • Page 6 LVP605 Series User Manual 3) Video output signals Port Description 1 X VGA (analog RGB signal output, can be connected to a monitor for monitoring; VGA OUT this port is highly recommended to use when operating or setting up LVP605)

  • Page 7: Connection Diagram

    LVP605 Series User Manual 3-3 Connection diagram Figure 3-2 Connection diagram www.videowall.cn...

  • Page 8: Chapter 4 Front Panel

    LVP605 Series User Manual Chapter 4 Front panel 4-1 Front view Figure 4-1 Front view 1) Input select buttons Input select buttons (V1, V2, V3, S-Video, DVI, VGA1, VGA2, YPbPr, EXT.): Select the input signal. 2) Setup buttons Setup button (Setup,↑,↓, Knob): Set up output image parameters.
  • Page 9 LVP605 Series User Manual 6) PC signal bypass output Information display (Info): Displays current settings and related information of LVP605. 7) PIP / PBP button PIP / PBP button (On / Off,M1，M2，M3，M4): On / Off: press this button to turn on/off PIP/PBP function. When the indicator is on, press input signal buttons to select two signals (have to be in different channels) or the same signal for PIP / PBP.

  • Page 10: Instructions

    LVP605 Series User Manual 4-2 Button instructions LVP605 has 25 panel buttons and 1 knob, which are in operation mode when LVP605 starts to work. The functions of these buttons are as follows: 1) Input signal select Buttons Description V1, V2, V3...
  • Page 11 LVP605 Series User Manual LVP605 supports 32-level output brightness adjustment. Adjustment range includes “0~64” and “0~100”, according to “brightness level”. The factory default of adjustment range is 0~64: 0 is the lowest value and 64 is the highest. To make sure of full grey scale of output image, the default of brightness is usually set as 64.
  • Page 12 LVP605 Series User Manual Blending: the LCD screen shows that the current signal is background, when selecting another signal from a different channel, two signals will blend. Press any signal button of these two again, this signal will quit from blending and be displayed independently.
  • Page 13 LVP605 Series User Manual differently. When PIP mode starts to work, press a PIP mode button (M1, M2, M3, M4) to select the mode accordingly. 7) Full / part display (Bypass) Press this button to switch between full and part display.

  • Page 14: Chapter 5 Settings

    LVP605 Series User Manual Chapter 5 Settings The following settings should be completed by professional technicians. Normal users should not try to change following settings unless they have received technical training. 3 categories of settings of LVP605 are opened to technicians. They can change those settings according to the specific requirements.

  • Page 15: 5-1Basic Settings

    LVP605 Series User Manual 5-1 User settings Category Item Language 语言 Language Output Format DVI EDID Output image Out_Hori_Width Out_Hori_Start Out_Vert_Height Out_Vert_Start Text mode Threshold Red Text overlay 10 Threshold Green 11 Threshold Blue 12 Brightness Brightness / Saturation 13 Saturation...

  • Page 16: Select Language

    LVP605 Series User Manual Functions of the knob and buttons in settings are: Button Function Step value in proportion to rotate Rotate speed speed. Rotate Decrease value or select previous clockwise value. Knob Rotate Increase value or select next value.

  • Page 17: Output Image Settings

    Please select a format with resolution the same as or higher than the resolution of LED screen. No.3: “DVI EDID” To make input image output pixel-by-pixel, now LVP605 series LED video processors offer customizable EDID (Extended Display Identification Data) of DVI source.
  • Page 18 LVP605 Series User Manual 1024x768_60 1024×768_75 1280×1024_60 1280×1024_75 1600×1200_60 1920×1080_50 1920×1080_60 1366×768_60 1440×900_60 Fixed EDID 2048×1152_60 2560×816_60 2304×1152_60 1920×1200_60 1200×1600_60 1080×1920_60 1536×1536_60 EDID width: customizable horizontal pixel of resolution Customizable EDID height: customizable vertical height of resolution EDID EDID frequency: customizable frequency of resolution Select item no.3 “DVI EDID”...

  • Page 19: Text Overlay

    LVP605 Series User Manual Item No. Item Name Out_Hori_Width Out_Hori_Start Out_Vert _Height Out_Vert_Start Remark: parameters can be changed by rotating the knob and the rotating speed decides the step value. When setting the parameters, the size and location of output image can be previewed in a rectangular frame and parameters can be saved by pressing the knob.

  • Page 20: Brightness / Saturation / Sharpness

    LVP605 Series User Manual Background Text Text overlay Figure 5-3 Text overlay 5. Brightness / Saturation / Sharpness LVP605 supports customizable brightness, saturation and sharpness: Item No. Item Name Definition Brightness Adjustment range includes “0~64” and “0~100”, according to “brightness level”.

  • Page 21: Hot Spare

    LVP605 Series User Manual Remark: AD1 and AD2 can’t be configured to match the same Input signal. 7. Hot spare LVP605 supports hot spare of input signals. When the current input signal is lost, LVP605 will switch to the spare signal automatically to avoid image interruption caused by the fault of signal source.
  • Page 22 LVP605 Series User Manual No.23: “ADC Calibration” Some problems such as color cast or extreme darkness may appear when analog signals are input to a processor of which white balance is not calibrated yet. LVP605 can automatically calibrate the white balance according to the input analog signals (CVBS, S-Video, YPbPr, VGA) to solve the above problem.
  • Page 23 LVP605 Series User Manual Remark: when multiple units of LVP605 are connected in parallel, their “Brightness level” should be the same, or their output brightness will be different. No.26: “Video stabilization” When CVBS/S-Video/HDMI/SDI is interlaced (for example: 1080i) and used as PIP, because of the limit of LVP605, video jitter might appear and this problem can be solved by “Video stabilization”.

  • Page 24: Pip / Pbp Settings

    LVP605 Series User Manual 5-2 PIP / PBP settings Category Item Main_Hori_Width Background Main_Hori_Start output settings Main_Vert_Height Main_Vert_Start PIP_Hori_Width PIP output PIP_Hori_Start settings PIP_Vert_Height PIP_Vert_Start PIP mode PIP switching mode switching effect There are 4 PIP / PBP display modes, in each mode background and PIP settings can be customized.
  • Page 25 LVP605 Series User Manual Item No. Item Name Main_Hori_Width Main_Hori_Start Main_Vert_Height Main_Vert_Start PIP_Hori_Width PIP_Hori_Start PIP_Vert_Height PIP_Vert_Start PIP switching mode: PIP signal switching can be seamless or fade-in / fade-out (0.5S / 1S / 1.5S). How to change PIP / PBP settings: Enter PIP / PBP settings: when PIP/PBP starts to work, press “Setup”...

  • Page 26: Mosaic Settings

    LVP605 Series User Manual 5-3 Mosaic settings Category Item No. and Name Out_Hori_Width Out_Hori_Start Out_Vert_Height Out_Vert_Start Input image In_Hori_Width settings In_Hori_Start In_Vert_Height In_Vert_Start Mosaic Mode The maximum output resolution of LVP605 is 2304×1152 or 2560×816 and it takes 2 sending cards to drive a LED screen with such resolution and that’s why LVP605 has 2 sending card slots;...
  • Page 27 LVP605 Series User Manual #1( 1728 x 960 ) #2( 1728 x 960) #3( 1728 x 960 ) #4( 1728 x 960) The following is the system topology： System topology 3456 Input signals 1920 LVP605#0 LVP605#1 LVP605#3 Loop out LVP605#2...
  • Page 28 LVP605 Series User Manual Item No. Item Name Out_Hori_Width Out_Hori_Start Out_Vert_Height Out_Vert_Start In_Hori_Width In_Hori_Start In_Vert_Height In_Vert_Start Mosaic Mode Remark: to make sure of uniformity of output images when running “Mosaic”, settings like brightness, saturation, sharpness and grayscale of each LVP605 should be the same.
  • Page 29 LVP605 Series User Manual No.1~4: “Output image parameters” These 4 parameters correspond to No.4~7 in user settings. 1# LVP605 2# LVP605 Input ( 0,0 ) （960,0） ( 0,540 ) ( 960,540 ) 1080 1920 3# LVP605 4# LVP605 LED display...
  • Page 30 LVP605 Series User Manual No.6: “In_Hori_Start” As shown in picture 5, the input starting point of each LVP605 should be set as: 1# LVP605 In_Hori_Start = 0 2# LVP605 In_Hori_Start = 960 3# LVP605 In_Hori_Start = 0 4# LVP605 In_Hori_Start = 960 No.7: “In_Vert_Height”...

  • Page 31: Chapter 6 Specifications

    LVP605 Series User Manual Chapter 6 Specifications Inputs 3×Video 1×S-Video 1×YPbPr Number / Type 2×VGA（RGBHV） 1×HDMI（VESA / CEA-861） 1×DVI（VESA） 1×EXT. (Extended) Video system PAL / NTSC Composite Video 1V (p_p) / 75Ω Amplitude / Impedance S-Video Amplitude / Y: 1.0V (p_p) / 75Ω, C: 0.35V (p_p) / 75Ω...
  • Page 32 LVP605 Series User Manual 1024×768_60Hz / 75Hz 1280×1024_60Hz / 75Hz 1600×1200_60Hz 1920×1080p_50Hz / 60Hz 1366×768_60Hz 1440×900_60Hz 2048×1152_60Hz 2560×816_60Hz VGA / DVI Format 2304×1152_60Hz 1920×1200_60 Hz 1200×1600_60 Hz 1080×1920_60 Hz 1536×1536_60 Hz Customizable output format (maximum horizontal pixel: 3840 or maximum vertical pixel:...
  • Page 33 LVP605 Series User Manual Product dimension: Figure 6-1 Product dimension Figure 6-2 www.videowall.cn...

  • Page 34: Chapter 7 Control Software

    LVP605 Series User Manual Chapter 7 ViewRGB LVP605 Series Control Software LVP605 control software is used to control LVP605 by software. With this software, we can realize:  Seamless switching or fade-in / fade-out of input signals.  4 customizable PIP / PBP display modes and text overlay.
  • Page 35 LVP605 Series User Manual As the above picture shows, user interface consists of 8 areas: a) RS232 COM port configuration b) IP port configuration c) Input signal select d) Switching effect select e) Information bar f) Timer settings g) Function select...
  • Page 36 LVP605 Series User Manual First select a COM port accordingly and then select the correct device ID. COM number can be checked in “Device Manager” of control PC as follows: Device ID (the same as No.21 “Device ID” in user settings) selected should be the same as that of LVP605 to be controlled.
  • Page 37 LVP605 Series User Manual In this area, buttons and indicators correspond to those on the front panel of LVP605. When devices are connected successfully, the software will read the current selected input signal of LVP605 and indicates it in a blue spot.
  • Page 38 LVP605 Series User Manual PIP / PBP and PIP mode will flicker, select another signal as PIP source. If the indicator of the PIP signal is on all the time, PIP display mode will work properly. PIP or PBP display modes can be selected by pressing buttons M1, M2, M3 or M4.
  • Page 39 LVP605 Series User Manual Timer of the control software can be used for timing switch of input signals of LVP605. Timer offers timing plans including “Day”, “Week”, “Month” and “Once”. Select one or several timing plans, click “Start” and timer starts to work.
  • Page 40 LVP605 Series User Manual Other settings PIP/PBP settings Mosaic settings As the above picture shows, the button “Refresh” is used to update any changed settings. The information bar will display any improper settings. The current output resolution of LVP605 is displayed in the interface, but it can’t be changed by the software control.
  • Page 41 LVP605 Series User Manual Output parameters should be set according to the resolution of LED screen. Mosaic mode and input parameters are only used for multiple unit mode. Options are provided to set whether the processor adopts synchronous or non-synchronous mosaic mode.
  • Page 42 LVP605 Series User Manual 3) Text It is used to set the red, green and blue threshold values of valid information of the text signal to be captured by the processor, also to set whether the text is higher or less than threshold values, select appropriate threshold values, click “Save”...
  • Page 43 LVP605 Series User Manual 6) Hot spare This option is used to turn on/off the hot spare function of the following four groups of input signals. 7) Timer settings Click in the user interface, timer setting will appear as follows:...
  • Page 44 LVP605 Series User Manual As shown in the above picture, there are two types of plans:  Cycle Plan  Once Plan Cycle Plan includes:  Day Plan  Week Plan  Month Plan Users can select a plan desired.
  • Page 45 LVP605 Series User Manual plan. Select the plan already added, and then you can modify or delete it. 3. Fast Mosaic Multiple units of LVP605 connected in parallel can be used to drive ultra large LED screens. Users can complete input/output parameter configuration of LVP605 through fast mosaic.
  • Page 46 LVP605 Series User Manual Remark: following conditions must be met for mosaic settings: 1. Settings of brightness, saturation, grayscale and sharpness of each LVP605 should be the same. 2. The output resolution of each LVP605 should be the same; the output resolution should be the same as DVI input resolution.
  • Page 47 LVP605 Series User Manual 1) Use software to connect LVP605 Select the device ID (same as item no. 21 “Device ID” in user settings) of the first unit, click “Connect”, it will be automatically connected, the software will then read and display its current parameters (e.g.: output resolution).
  • Page 48 LVP605 Series User Manual Caution: both input and output parameters of LVP605 must be even, but the results of auto calculation may be odd, if so, it is necessary to set an adjusted value to correct the parameters to be even, and then you can click “Set”...

  • Page 49: Chapter 8 Notes About Models

    LVP605 Series User Manual Chapter 8 Notes about models LVP605D: with a VGA/DVI/HDMI extended input port LVP605S: with a SDI/HD-SDI extended input port LVP605: with a VIDEO extended input port www.videowall.cn...

  • Page 50: Chapter 9 Copyright Information

    LVP605 Series User Manual Chapter 9 Copyright info The copyright of this manual is owned by SHENZHEN VDWALL CO., LTD., unless with prior consent of VDWALL, nobody is permitted to copy or use any part of the information contained herein.

Table of Contents

Save PDF