H/W Monitor - Aaeon IMBM-H81B Manual

Serial Port 2 Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options:
[Auto] [IO=2F8h; IRQ=3] [IO=3F8h; IRQ=4]
Serial Port 3/4 Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options:
[Auto] [IO=2E8h; IRQ=11] [IO=3E8h; IRQ=11]
Serial Port 5/6 Configuration
The sub-items in this menu allow you to set the serial port configuration.
Serial Port [Enabled]
Allows you to enable or disable the serial port (COM). Configuration options:
[Enabled] [Disabled]
Change Settings [Auto]
Allows you to select the Serial Port base address. Configuration options:
[Auto] [IO=2D0h; IRQ=11] [IO=3C0h; IRQ=11]
Restore on AC Power Loss [Last State]
[Last State] The system goes into either off or on state, whatever the system
state was.
[Always On] The system goes into on state after an AC power loss.
[Always Off] The system goes into off state after an AC power loss.
3.3.10

H/W Monitor

The items in this menu allow you to configure the smart fan.
Chapter 3: BIOS setup
3-7