Table of Contents
Advertisement
7.
USB 2.0 ports. These 4-pin Universal Serial Bus (USB) ports are available
for connecting USB 2.0/1.1 devices.
8.
USB 3.0 ports (USB3). These 9-pin Universal Serial Bus (USB) ports
connect to USB 3.0/2.0 devices.
NOTES:
•
The XHCI (USB3.0) controller is not natively supported under Windows® 7
OS. Use a P/S2 or SATA device during OS installation.
•
Due to USB 3.0 controller limitations, USB 3.0 devices can only be used
under a Windows
•
USB 3.0 devices can only be used for data storage.
•
We strongly recommend that you connect USB 3.0 devices to USB 3.0
ports for faster and better performance for your USB 3.0 devices.
9.
DVI-I port. This port is for any DVI-D compatible device or VGA port through
an inverter.
Chapter 2: Motherboard information
OS environment and after USB 3.0 driver installation.
®
2-17
Advertisement
Table of Contents
