Table of Contents
Advertisement
7.
Serial port connectors (10-1 pin COM1~10)
These connectors are for serial (COM) ports. Connect the serial port module
cables to these connectors, then install the module to a slot opening at the
back of the system chassis.
IMBM-H81B
IMBM-H81B Serial port connectors
NOTE: The COM module is purchased separately.
8.
Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~2)
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
IMBM-H81B
IMBM-H81B Intel
NOTES:
•
You must install Windows
•
When using hot-plug and NCQ, set the SATA Mode Selection item in the
BIOS to [AHCI]. See section 3.3.3 SATA Configuration for details.
Chapter 2: Motherboard information
SATA 6.0Gb/s connectors
®
7 before using Serial ATA hard disk drives.
®
COM3456 COM78910
PIN 1
COM2 COM1
PIN 1
2-21
Advertisement
Table of Contents
