Parity Selection - TEC B-680 SERIES Maintenance Manual

6. DIAG. TEST OPERATION

6.3.11 Parity Selection

NOTES: 1. Holding the [FEED] key or [RESTART] key down for more than 0.5 seconds enables a fast
forward.
2. A changed parity is stored in memory by pressing the [PAUSE] key.
Power off
Turn on the power while
holding down the [FEED]
key and [PAUSE] key.
< 1 >
D I A G N O S T I C
Press the [FEED] key.
< 2 >
P A R A M E T E R
Press the [PAUSE] key 12 times.
P A R
I T Y
Select parity with the
[FEED] key or [RESTART]
key. (See NOTE 1.)
Press the [FEED] key
and [RESTART] key
at the same time.
1 . 0 A
V
S E T
E V E N
EVEN
ODD
NONE
Press the [PAUSE] key.
Continued on Section 6.3.12
Transmission Control Mode
Selection.
6-32
EO18-33006
6.3 PARAMETER SETTING MODE